Grease is now a commonly used mechanical equipment lubrication products, but if there is no viscosity grease will be how, in this regard, have you thought about it, without the viscosity of the grease can still protect mechanical equipment, the following small talk to you.

Viscosity is the internal resistance of the fluid, so the viscosity of the grease is usually said to be the thickness of the oil, high viscosity grease is the oil film thick, low viscosity grease is the oil film thin.

When the engine is running, only the oil film is not broken to protect the engine, if the oil film is too thin in operation, the oil film rupture, it will cause a lot of wear and tear on the engine. If the grease loses its viscosity, then the film will also lose its ability to protect.

The viscosity of the grease is too high and too low is not good, the right viscosity is the best, because if the viscosity of the grease is too high, there will be grease in a short period of time is not transported to the parts between the situation, which will increase the start of the engine by the wear and tear, low temperature start will also become difficult, cleaning and cooling effect will also become worse, the loss of power will also lead to increased fuel consumption.

If the viscosity of the grease is too low, it will not be effectively adsorbed between the parts, and the lubrication and anti-wear and sealing effects will not be well played. Therefore, the right viscosity is the best choice for motorbike grease.

This is what happens when grease has no viscosity.