Welcome to the official website of Shanyi Lubricating Oil Co., Ltd!

Shanyi Lubricating Oil Co., Ltd

Shanyi Lubricating Oil Co., Ltd

SpecialGreasesupply For Industrial Injection Molding Machinery

Hotline

400-0018-185

English 中文

Location:Home » Industry Info

Industry Info

Consequences of using poor quality grease

Time:2018-10-16 00:00:00    Views:

In our daily life, whenever we find that the door shaft squeaks, can not be closed, you can use the lubricant, can play a good role, then if you use but poor quality grease then what will happen, the following small talk to you about the consequences of using poor quality grease.


1, card ring: if the grease is not clean dispersion, long-term use will produce carbon around the piston ring, and carbon can cause the piston ring jammed or broken when serious.


2, if the grease viscosity is not suitable, lubrication is not good, which will cause low oil pressure, engine oil shortage, cooling system failure and other problems, and then cause the engine overheating, in this case, high-speed operation, it is easy to burn the bearings.


3, some poor quality grease anti-wear performance is not good, will make the piston ring and cylinder between the wear intensified, the oil ring scraping role weakened, will lead to grease into the combustion chamber to participate in the combustion, some injection molding machine engine seal is not good, valve oil ring failure, etc. will cause grease leakage, these will accelerate the consumption of grease.


4, grease light alarm: once this phenomenon occurs mainly in the following areas to find the cause: grease shortage, grease induction plug damage, grease pump filter blockage, grease viscosity is not enough, replace the grease or check for fuel dilution and engine overheating, grease limit valve spring failure.


5, burn tile: if the choice of grease quality is not good, or the choice of grease viscosity is not right, the lubrication effect is not good, and oil pressure is too low, engine oil, cooling system failure can cause engine overheating, in this case, high-speed operation, it is easy to burn the bearing, in addition, if the use of poor quality grease cartridge or not on time to replace the grease cartridge, will also make impurities in between. This will cause the bearing to burn.


The above is the use of poor quality grease consequences of sharing, if you want to know more about the knowledge, please pay attention to this site.


MORE+ Recommended Products

FS2-7 / FS2-4 Lubricating Grea...

LHL-X100-7 / LHL-X100-4 Lubri...

SKF润滑剂

德国OKS250

摩力克 HP-500 模具保养润滑脂...

摩力克 molykote HP-300 模具顶...

NSK LG2 食品级无尘室润滑脂...

MYS-7 Sumitomo Injection Moul...

Address: No. 18, zone B, Hongye North Road,
138 Industrial Zone, Tangxia Town,
Dongguan City, Guangdong Province

Tel: Hotline:400-0018-185 Mobile:18002828218 / 13580812398

Contact Us →
  • Alibaba

    Alibaba

  • WeChat

    WeChat

  • WeChat

    WeChat

Copyright © 2018 Shanyi Lubricating Oil Co., Ltd All Rights Reserved 粤ICP备17102562号
Top